How to Clean the Spots on a Machine Surface?
It is essential to clean the spots on a machine to prevent rust and cross-contamination.
The cleaning procedure entails removing any remaining product and material build-up from the entire mixing tank. The mixing shaft will be cleaned with water to accomplish this.
The ribbon powder mixer is then cleaned from top to bottom. The rinsing water used to clean the outlets is collected in the mixing container and used to clean the mixer's interior, which necessitates the use of a cleaning agent.
Cleaning the mixing tank is accomplished using the mixing shaft. It rotates back and forth, ensuring intense and turbulent contact between the inner surface of the mixer and the cleaning agent. If necessary, any product residue left in the mixer can be absorbed during this step.
It is essential to dry the mixer completely with conditioned ambient air. It has been demonstrated that blowing out the entire system with heated compressed air or using blowers in combination with absorption dryers is effective.
Post time: Nov-18-2022